Utilaje de roluit profile PVC (arcade)

Akd3000TECHNICAL FEATURES

Utilaj pe baza de glicerina(manual)

Machine type Akd 3000

Voltage 3×380 Volts

Frequency50 Hz

Heating capacity 10 kw

Fuse20 A

Heating tank volume 150 liters

Length5000 mm

Width 3000 mm

Heigth 900 mm

Weigth 900 kg

Akd 5500TECHNICAL FEATURES

Utilaj pe baza de glicerina(automat)

Machine type Akd5500

Voltage 3×380 Volts

Frequency 50 Hz

Heating capacity 2×10 kw

Motor power 1.3-1.8 kw

Total power 21.8 kw

Fuse

For motor 2.5-4Amper

For heating elements 3×20 Amper

Heating tank capacity 250 liters

Length 10650 mm

Width 3000 mm

Heigth 900 mm

Weigth 2000 kg

Akd 6000TECHNICAL FEATURES

Utilaj pe baza de aer cald(manual sau automat)
Telefon:0740.901.344
Tel:         0764.648.580; email: office()casanouapvc.ro
http://www.casanouapvc.ro
email manager: ersin_erso()yahoo.com

Akd 6000TECHNICAL FEATURES

Machine type Akd60000

Machine Dimensions

Heating Tank 3200 x 2000 x 800 mm

Working Table 3000 x 2000 x 850 mm

Heating Capacity15 kw

Voltage 380 Volt

HEATING TANK (Tunul de incalzire)

It is made of stainless steel in 2 mm thickness and its capacity is 220 liters. For energy saving it is isolated by glass wool. It has a mechanism that ensures dipping and lifting of the profiles. Maximum profile length that can be dipped into the tank is 5500 mm. Heating power is 20kw and it is controlled by digital thermostat. Moreover it is equipped with 24 hours time relay.

MOLD SYSTEMS (sarpele)

It is made of a special plastic developed for bending PVC profiles by heating. This plastic has a low friction coefficient that has high pulling resistance and it has a structure that shall not deform in the temperature under which PVC profile softens. Mold system composes of three groups; external mold, internal mod and internal fills. External and internal molds are manufactured in two sizes as 3000 and 2500 mm (when added totally 5500 mm) and internal fills are manufactured in two sizes as 3000 and 4000 mm.

MOLD FASTENING ELEMENTS

There are 82 units of fast fastening elements in total; 15 couples for working desk and 26 couples for extensions. These elements are used for fastening the molds fast onto working desk and extensions.

RADIUS ADJUSTMENT COMPASSES AND COMPASS ADJUSTMENT

There are two radius adjustment compasses; one 1100 mm and the other 3100 mm. With the help of these compasses mold holder fastening elements are fixed on their places on the table. It allows moving the circle center out of the table for the mold adjustment of arch parts whose compass leg has large radius ( R>1000mm ).

FILTERING AND WASHING BOILERS

Filtering boilers are used for taking back the special heating liquid remaining on the profile that is bent after the bending process. After it is waited within these boilers for a time on the bent profile legs, it is washed within the water filled boiler and cleared of the special heating liquid.

MOLDS

The machines include a full set of bending molds. We need the profile samples to produce the right molds. We prepare molds before the shipment of the machine. We produce molds for all kinds of PVC profiles.

Bending molds for the motorized Akd 5500

* 3000 + 3000 mm. total 6000 mm. Inner Fillings 3000 + 4000 mm.
* Frame profile bending mold
* Sash profile bending mold
* T-mullion profile bending mold
* Glass bead – Single bending mold
* Glass bead – Double bending mold

Bending molds for the manuel Akd 3000
* 3000 mm. Inner Fillings 3000 mm
* Frame profile bending mold
* Sash profile bending mold
* T-mullion profile bending mold
* Glass bead – Single bending mold
* Glass bead – Double bending mold

Telefon:0740.901.344
Tel:         0764.648.580;

email: office()casanouapvc.ro
http://www.casanouapvc.ro
email manager: ersin_erso()yahoo.com

Vand masina de taiat BAGHETA

Vand masina de BAGHETAT

Vand masina de taiat bagheta , automat la 380
Marca Yilmaz
Nefolosita
Predarea: Cu proba
Un pret unic in Romania
Nu ratati aceasta ocazie

Pret 5799.12 RON

Pretul unui astfel de utilaj (marca yilmaz) este de 2400 euro fara TVA
Vanzator: Clientul nostru- Tamplarie PVC si Aluminiu
Oras predare: Medgidia
Utilajul nu a fost folosit (niciodata-spatiul nu permitea)
Conveiorul de masurare a fost luat si echipat un alt utilaj
Costul unuia nou? aproximativ 300 Euro cu TVA (in functie de marime)

MASINA DE TAIAT BAGHETE YILMAZ AUTOMATA
CK 410
Permite taierea baghetelor de PVC la 45 de grade, Sistem de prindere pneumatic, Doua discuri de taiere cu avans reglabil, Masina este utilizata la debitarea baghetelor din PVC, Prinderea profilelor este pneumatica, Actionare automata, Masina poate fi echipata cu conveior de masurare si dispozitiv de masurare usoara, Viteza de taiere este reglabila, Debitarea se face cu doua motoare si permite debitarea baghetelor in unghi de 45 de grade. Putere motor – 1200 W x2 Disc taiere, Freza – D=200mm d=30-32mm, Turatie – 3000 rot/min, Latime – 67 cm, Adancime – 132 cm, Inaltime – 130 cm, Greutate – 206 kg, Consum aer – 40 lt/min .

D = diametrul discului, d = diametrul axei , Dmax = diametrul max al frezei

2400W 50/60Hz

230V AC P N PE
400V AC 3P PE

3000
D/dak
RPM

D:200
d:30/32
mm.

35
Lt/dak.

6/8
Bar

W: 60
L: 131
H:129
cm.

168 kg.

134 kg.

Vand set utilaje mini varianta

Vand set de utilaje second hand

Innoieste atelierul si vrea sa scoata ceva bani si din cele folosite pana acum

Utilaj de lipit

Utilaj de taiat

Utilaj de chertat (frezat teu)

Compresor

Masina manuala de debavurat (curatat colturi dupa lipitura)

Toate la incredibilul pret de 10.000 Lei

Oferta valabila o sg data pana la expirare

Multumim pentru intelegere

Predare: Oras Bucuresti

Modalitatea de plata: cash

Mod de predare: cu proba

Predarea: Luni-Vineri: 20-22 Sambata: 15-17 Duminica: 12-20

Persoana de contact:

SC Casa Noua SRL

Naim Ersin

0765092322

0740901344

Accesorii PVC

Gama noastra de accesorii de tamplarie PVC
– va ofera confortul de care aveti nevoie

Accesoriile de tamplarie PVC sunt cea mai buna solutie pentru ferestre si usi deoarece va ofera protectia termica si fonica necesara. Tamplaria PVC cu geam termopan nu isi pierde culoarea in timp, este usor de intretinut si va ajuta sa economisiti bani prin prisma reducerii costurilor de incalzire a locuintei dvs.

Pentru mai multe detalii privind gama noastra de produse de tamplarite PVC, va rugam sa ne contactati la numarul de Tel/Fax: 0241-822282, Tel: 0740.901.344,Manager: naim ersin, email: ersin_erso@yahoo.com
http://www.casanouapvc.ro
http://utilajpvc.blogspot.com/
https://utilajpvc.wordpress.com/

Observatie: Preturile sunt negociabile in functie de cantitatea si modalitatea de plata
Transport in functie de comanda pentru localitatile Bucuresti si Constanta
Mai comercializam: panel artkraft, weiss(germania), suruburi de montaj, holsuruburi, accesorii insecte, utilaje pvc, utilaje aluminiu,accesorii pvc de orice fel, distribuim accesorii pvc in judetul constanta
Pretul la feronerie pvc variaza in functie de curs

Doua principii:

1) Nu aveti nimic de pierdut studiind oferta noastra!
2) Noi investim in calitate, nu in publicitate!

Utilaje pvc varianta de utilare mini-atelier

Don Carlos (cutit debavurat manual)

Debitat (portabil, manual)

Chertat T (frezat T)

Utilaj de lipit pvc

Varianta de utilare mini atelier

Oferta limitata

Utilaj de lipit=2200 euro cu TVA

Utilaj de lipit pvc

Chertat T (frezat T)

Utilaj chertat T=1550 RON cu TVA

Debitat Beta=1550 RON cu TVA(cap care se inclina)

Debavurat Manual(Don Carlos)=150 RON cu TVA

Total= 3250 RON cu TVA + 2200 euro cu TVA (3000 euro cu TVA inclus- variabil in functie de curs )

Oferta unica

Oferta unica

2 utilaje PVC:  Lipit(220V) si debitat(380V) la un super pret

3360 Euro

Lipit (220V)= 2200 euro

Debitat(380V, disc de 400)= 1800 euro

Utilaje PVC-varianta de utilare

Varianta de utilare pentru ateliere tamplarie PVC
Varianta de utilare pentru ateliere de productie medie-marca Onat
Atelier de tamplarie PVC cu capacitate de productie de 20-25 rame / 8 ore, cu 4-5 muncitori. Toate operatiunile sunt efectuate de utilaje automate. Varianta de utilare completa.
1. Masina de debitat cu prindere mecanica –marca Onat
pret: 1880 €
– taiere automata de jos in sus
– viteza de avans a cutitului reglabila
– disc de taiere de 420 mm
– unghi reglabil 15, 22.3, 30, 45, 90 grade
– carcasa de protectie si dubla comanda manuala

2. Masina de frezat montanti (chertat Teu) automata cu unghi reglabil
pret: 1350 €
– prindere pneumatica
– viteza de avans reglabila
– unghi de prindere a profilului reglabil

3. Masina de sudat PVC
pret: 2500 €
– sudare la un capat in unghiuri cuprinse intre 30 si 180 grade
– posibilitate de reglare a fortei de presare si a fortei de strangere a profilului in menghina
– limitarea cordonului de sudura

4. Masina de debavurat automata cu 4 freze
pret: 2700 €
– asigura debavurarea automata a cordonului de sudura si a colturilor de 90 de grade
– operare complet automata
– patru freze interschimbabile

5. Freza cu pantograf- nu mai aveti nevoie de 3 utilaje
(3 operatii: freza cu pantograph, gaurit tripla,freza orificii de scurgere)
pret: 2.700 €
– prindere pneumatica
– placa de copiere universala
– masina de gaurit orizontala cu 3 burghie in trepte
– masina automata de frezare pe trei axe
– avansul frezelor si cusa reglabile

6. Masina de debitat baghete automata
pret: 1800 €
– prindere pneumatica
– taiere automata cu viteza reglabila

TOTAL: 12.930 € TVA inclus

OBSERVATIE!
Aveti in vedere si achizitionarea unei masini de debitat armatura, la oricare din variantele alese:
1. MASINA DE DEBITAT ARMATURA
pret: 900 €
– disc de taiere de 500 mm
Nota: Aceste preturi sunt informative si depind de gradul de complexitate al fiecarei comenzi ,el va fi negociat cu fiecare client in parte.
* Pentru utilaje la 2 sau 4 capete precum si utilaje CNC va rugam sa ne contactati
** Pretul este valabil pentru cumpararea setului, si plata op
*** Noi investim in calitate nu in publicitate!
Telefon:0740.901.344
Tel:         0764.648.580;

email: office()casanouapvc.ro
http://www.casanouapvc.ro
email manager: ersin_erso()yahoo.com